DSC thermograms and LSCM
methods were used to investigate the influence of molecular weight of PEG on microphase-separated structure to illustrate water adsorption capacity in PETG copolymers affected by phase structure.
70%, which were obtained by ABF++, LSCM
and ARAP algorithms, respectively.
fluorescens demonstrated partial coverage of the nanocrystalline diamond as shown in the LSCM
image in Figure 2.
After 3 days of water immersion, the coating wet-adhesive strength is weakened and the scratch-induced coating debonding can be detected using LSCM
surface profile analysis.
i]] of C6 glioma cells by LSCM
(the wavelength of excitation wave is 488 514 nm).
alliance with 3PL+4PL=7PL Principal, Advantages, Outsourcing (3PL)
The heights of V-cut patterns for theses temperature settings were measured by LSCM
In a special sequential experiment, LSCM
was used to monitor the continuous degradation of the same set of AU specimens at the same location as a function of time.
The topographic changes of an aminecured epoxy were monitored by AFM and LSCM
during exposure to an outdoor environmental chamber.
5-3 [micro] m in the absence of LTI, a form similar to that observed by LSCM
A reflection LSCM
was employed to characterize scratch morphology.
A detailed description of LSCM
measurements can be found elsewhere.