OREC

AcronymDefinition
ORECOcean Renewable Energy Coalition
ORECOklahoma Real Estate Commission
ORECOrganisation of Rice Exporting Countries
ORECOhio Rural Electric Cooperatives, Inc. (Columbus, OH)
ORECOrix Real Estate Capital (investment firm)
ORECOhio Real Estate Commission (Ohio Department of Commerce)
References in periodicals archive ?
EDF ER and OREC have also entered into a collaboration agreement with the aim of developing research and development projects to tackle some of the technology challenges facing the sector.
Andrew Jamieson, chief executive of OREC said: "ORE Catapult and EDF will collaborate closely on research and development to accelerate the development of innovative technologies for the offshore wind industry, driving down the cost of energy from offshore wind and benefiting the whole offshore renewables" Andrew Jamieson, chief executive of OREC said: "ORE Catapult and EDF will collaborate closely on research and development to accelerate the development of innovative technologies for the offshore wind industry, driving down the cost of energy from offshore wind and benefiting the whole offshore renewables industry.
The activation energies of epoxy decrease when the OREC with reactive imidazole groups are incorporated.
In the nanocomposites, a small increase in the viscosity can be seen after the curing point when introducing more OREC clay.
It indicates that the viscosity of the nanocomposite is sensitive to the OREC content.
In this study, OREC was introduced into bisphenol A dicyanate (BADCy) resin to develop a novel BADCy/OREC system.
The d-spacings of REC and OREC calculated according to the Bragg's law are 2.
05 weight ratio of epoxy resin/BADCy) were heated to 100[degrees]C to form a liquid, and then OREC was added into the liquid.
EDF Energy research and development and OREC have also entered into a collaboration agreement with the aim of developing research and development projects to tackle some of the technology challenges facing the sector.
The OREC were dried in a vacuum oven at 90[degrees]C for 12 h, pure nylon 6 was cut into the sheet and dried in a vacuum oven at 100[degrees]C for 12 h.
2, we also found that the OREC is in exfoliated state when the clay loading is <3 wt% and in intercalated state when the clay loading is >3 wt%, which is confirmed by TEM measurements.