PA6Polyamide 6 (Nylon)
References in periodicals archive ?
Ultrasint PA6 X043 Black offers high strength, good recyclability and a high heat distortion temperature, at a competitive cost.
During the D-LFT process, which includes an oven to dry the material, two extruders, a conveyer and a press, there are three types of degradation mechanisms PA6 has the potential to undergo: thermal [3, 16], mechanical [14], and thermooxidative [3, 17].
In case of a composite based on a PA6 matrix, this can quadruple the strength.
In the area of tensile strength, both Dynalite and Flowcore display results produced by the temperature-dependence of the properties of the PA6 base material.
Nocci, "Compatibilizing PPE and PA6 with nitro-phthalimide derivatives" Journal of Materials Science, vol.
Even in terms of comfort for the test were as arm Vibration noise or better based material PA6.
A significant amount of waste is collected each year during the manufacturing of PA6 fibers and also from used carpets.
It crystallizes much slower in the film bubble than conventional PA6, matching the crystallization rate of other material layers.
DSM says all properties of the film in use are the same as in film made with standard PA6.
Noy Engineering can offer innovative design solutions and effective engineering services for the entire PA6 and PA6.
At the same event, DSM Engineering Plastics will announce the commercialisation of Akulon RC, a portfolio of post-industrial recycled grades of PA6 for use in automotive under-the-bonnet applications.
It was found that the surface resistivity of the PA6 nanofiber with the ITO deposition had a significant drop and the ITO deposition obviously affected the light transmittance of the PA6 nanofibers.