Also found in: Dictionary, Encyclopedia, Wikipedia.
SWARFSenior Warfighter Forum
SWARFScottish Wider Access Regional Forum (UK)
References in periodicals archive ?
The effective removal of swarf from the oil using the AutoMag Skid magnetic filtration system from Eclipse Magnetics has resulted in extended lifespan of machine components, including bellows, saving OSL Cutting Technologies 3000 [pounds sterling] per year.
Lubriserv can solve these problems by selecting the optimum cutting fluids, effective coolant filtering, swarf management and air filtration systems for manufacturing operations.
I had to leave after a while because of getting swarf in my eyes.
At this point a section of swarf - that's waste metal - caught his glove.
This high frequency enables the unit to distinguish small fragments of stainless steel, swarf and other metals.
The module also provides simultaneous 5-axis support for Swarf milling, plus 5-axis Finishing and 3D Projection Finishing cutting cycles.
These materials, known in the steel industry as electric arc furnace dust, mill scale and swarf, have been mixed with carbon palletized and pre-reduced in a rotary hearth furnace.
Considerable tooling insert and swarf management development had been undertaken by Widia Valenite in conjunction with Hegenscheidt-MFD.
In most cases, the sequence is 120-, 240-, 320-, 400- and 600-grit papers (ANSI/CAMI grit size scale) using water both as a coolant/lubricant and as a cleanser to wash the abrasive remains and metal swarf (remains) off the paper surface.
Known over 20 years for its reasonably-priced, high-end, 2-through-5-axis CNC programming systems, Surfware's current version of SURFCAM Velocity([R]) 4 SP1 gives even more control over 4 and 5 axis swarf cutting, axial cutting, retract motions and imported geometry.
Tenders Are Invited for Collection, Removal and Disposal of Metal Swarf Chips, Knocked Out Materials Debries Waste Sand, Garbage Etc From Various Shops, Building to the Designated Place in Factory.
Companies that manufacture components of complex design face the challenge of how to remove swarf, oil and other contaminants efficiently and reliably from difficult-to-reach areas, such as undercuts, blind bores and intricate channels.