Water Boiling Test - How is Water Boiling Test abbreviated?
References in periodicals archive
As with the cold-start test phase, this second phase aimed to make the water in the pot on the main burner reach local boiling temperature, after which the same procedure described for the cold-start phase was applied, except that the charcoal remaining in the combustion chamber was not weighed (The Water Boiling Test, 2013).
Finally, both the pot with fuelwood was weighed apart from charcoal water and the fuelwood was weighed apart from charcoal were weighed (The Water Boiling Test, 2013).
00 Table 3: Parameters determined from Water Boiling Test High-Power High-Power (Cold Start) Phase (Hot Start) Phase Parameters Traditional Nozzle Traditional Nozzle determined 3-stone Type 3-stone Type from WBT open fire Stove open fire Stove Burning 0.
1 shows the temperature rise versus time for the water boiling tests carried out with the nozzle type stove and the traditional three stone open-fire for the high-power (cold start), high-power (hot Start) and low-power (simmer) phase tests respectively.