SPDL

(redirected from spindle)
Also found in: Dictionary, Thesaurus, Medical, Financial, Idioms, Encyclopedia, Wikipedia.
AcronymDefinition
SPDLScottish Parasite Diagnostic Laboratory (UK; est. 1982)
SPdLSecond Ponce de Leon (Baptist church)
SPDLStanford Plasma Dynamics Laboratory
SPDLSmart Product Design Lab (Stanford University; Stanford, CA)
SPDLStructured Program Design Language
SPDLSpindle
SPDLStandard Page Description Language
References in classic literature ?
The crone was hobbling along with difficulty, leaning heavily upon a gnarled stick and bearing the spindle on her other arm.
Current production pickers have a top-to-bottom spindle contact area of about 30 inches using 18 or 20 spindles per bar.
However, when it comes to the ultra-high-speeds of grinding spindles (dmn200 x 104 above), grease lubrication poses a challenge in terms of the life of the spindle.
The spindle can be used on existing machining centers as it is driven by air supplied through a stop block, although air from the machine spindle can be used.
The spindle is submersed in the sample fluid by lowering the handle.
In addition, the lesions were evaluated for the presence of squamous metaplasia, stromal myxoid change, spindle cell nuclear atypia (none, mild, moderate, or marked) and spindle cell mitoses per 10 high-power fields within the benign sclerosing lesion stromal spindle cell component and biopsy site (ie, the fibroblastic and myofibroblastic component), if present.
Researchers around the world are interested in the mechanisms of spindle formation because if chromosome segregation does not take place correctly in human cells, the process can cause cancer or birth defects.
Raise the spindle to its highest position and clamp a 12-18-inch steel straight edge between the spindle collars.
Now place your top handrail over the first spindle to set the height.
Therefore, it is necessary to consider a simplified set of main factors as measurable heat elements, namely the machine tool spindle bearings and the spindle drive motor [14].
The spindle horn is a critical safety item so follow every step like it says in WP 0560 00 of TM 1-1520-237-23-7 when removing it.
resistance to generation of vibrations achieved through symmetrical distribution of rotational masses with respect to the rotation axis, balancing the spindle with all the fixed components;