Actan GS is an ultra-low VOC adhesion primer, with well-proven performance on new or old galvanised steel and aluminium.
The trial at Buxton involved adhesion tests and gloss readings at various points of the five different top coated areas both with and without Actan GS pre-treatment.
The results are clear in the report conclusion - the use of Actan GS significantly improves the adhesion of subsequent topcoats.
With a VOC content of less than 0.1% per litre, Actan GS was applied directly to two weathered galvanized steel closed circuit TV columns situated on the eastern footpath and cycle track, 50 metres above sea level.
Developed by Pugh and Co International from laboratories in Brussels, Actan GS can be over-coated with a wide range of one and two pack protective paint systems including vinyls, acrylics, epoxies, chlorinated rubbers and polyurethanes.
Actan GS Primer from Pugh & Co International has received certification from the BBA (British Board of Agrement) under the Highways Authorities Product Approval Scheme (HAPAS).
Actan GS is a water-borne surface treatment/primer for galvanised steel, aluminium and stainless steel surfaces.
Actan GS is proven to perform well on new and weathered galvanised steel.