AFPB

(redirected from Asymmetric Four-Point Bending)
AcronymDefinition
AFPBAgriculture and Farmland Protection Board (New York)
AFPBAir Force Publishing Bulletin (USAF)
AFPBAsymmetric Four-Point Bending (composite materials)
Copyright 1988-2018 AcronymFinder.com, All rights reserved.
References in periodicals archive ?
Using specimens with various compression ratios, tension tests were conducted for measuring Young's modulus in the radial and tangential directions and Poisson's ratio on the cross section, whereas asymmetric four-point bending tests were conducted for measuring the shear modulus on the cross section.
From this lumber, cubic specimens with side length of 10 mm were cut and used for the tension and asymmetric four-point bending tests as described below.
Asymmetric four-point bending tests were conducted for obtaining the shear modulus on the cross section of compressed wood [G.sub.RT].
We conducted tension and asymmetric four-point bending tests of compressed wood of Sitka spruce (Picea sitchensis Carr.) with various compression ratios, and obtained Young's modulus in the radial and tangential directions, and shear modulus and Poisson's ratio on the cross section corresponding to the compression ratios.
Full browser ?