AvPh

(redirected from Average Phase)
AcronymDefinition
AvPhAverage Phase
References in periodicals archive ?
As the proposed inverse method in Figure 4 can be used to determine a unique stress-strain curve for a given nanoindentation load-depth curve, the average phase properties of a multiphase material can now be obtained by averaging the multiple stress-strain curves obtained from the corresponding nanoindentation load-depth curves.
From these results, we can see that the overall trend in the average phase cycle length and the node phase utilization with algorithms PCL-BAB, PCL-H and traverse are decreasing gradually.
We use the principle of Kuramoto synchronization for the two clusters of REM-on and REM-off neurons and we take [theta] as the average phase of the cluster REM-on and [phi] as the average phase of the cluster REM-off.
According to Kuramoto theory, we have linked to the REM-on population the average phase [theta] and to the REM-off population the average phase [phi].
We consider [theta] and [phi] as the average phases of the two populations or clusters of neurons.
Reliability or resilience test Performance metric Electromagnetic Susceptibility Average phase noise spur (dB) Performance during shock Peak frequency deviation (ppm) Performance during Frequency deviation per g (ppb/g) sinusoidal vibration Performance during random Induced integrated phase vibration jitter (ps rms) Table 2.
The phase diagram in Figure 11(b) showed an average phase of -27[degrees] in the frequency range between 1 Hz and 10 Hz showing, in that range, coherence with the fractional exponent related to the modules -m * 90[degrees] = 27[degrees].
The resulting average phase slope of the radome-induced phase difference will cause the boresight to change for various scan angles relative to that without the radome.
Another way to study interactions in spatially-extended systems is based on a statistical analysis of multivariate phase synchronization phenomena by using the phase-coherence matrix [1, 6] or by constructing a matrix based on the average phase synchronization times (APST) among all available pairs of channels [2], [6].
The values of the PP and SAN polymers are the measured ones, and the properties of the low molecular weight MA4 graft copolymer are smoothed data from the measurements, with an average phase angle of 74 [degrees].
Full browser ?