BS ENBritish Standard European Norm (audio level measurement)
Copyright 1988-2018, All rights reserved.
References in periodicals archive ?
BS EN 62061 takes the provisions, rationale and SIL (safety integrity level) classification system of IEC 61508, and interprets them for machinery control systems.
* BS EN 374-2 Protective gloves against dangerous chemicals and Determination of resistance to penetration
* BS EN ISO 4126-6 Safety devices for protection against excessive pressure.
* BS EN 61587-5 Mechanical structures for electronic equipment.
En el analisis se eligieron tres componentes (C1, C2, C3) (Cuadros 5 y 6); el C1 esta dominado por BS en raiz y BS en raiz-vastago; el C2 por el numero de hojas y la BS en hojas, y el C3 por la longitud del vastago y BS en hojas (Fig.
Technically, the QUALICOAT standard is more robust as it specifies minimum etch requirements within the pretreatment process and a finished powder coated surface test for filiform corrosion resistance, which the BS EN 12206-1 does not require.
The company says it has met the requirements of AS EN 9120 Bureau Veritas Certification, which verifies that all Quality Management Systems conform to both BS EN ISO 9001:2015 and EN 9120:2016.This latest version of the standard encompasses the supply of bearings and associated parts for use in aerospace manufacture.
However, while BS EN 197- 1 [2] permits the use of silica fume (SF), metakaolin (MK, a natural calcined pozzolana), fly ash (FA) and Ground Granulated Blast-furnace Slag (GGBS) of up to 10%, 35%, 55% and 95% respectively, data from the European Ready Mixed Concrete Organisation [3] showed that the total content of these supplementary cementitious materials (SCMs) in ready-mixed concrete, which are majorly FA and GGBS, is less than 20% of the total cement consumption.
Norbar Torque Tools is the first laboratory in the world to be accredited to perform calibrations on hand torque tools to the newly revised BS EN ISO 6789-2:2017 standard.
International Eyewear sunglasses are offered with lenses with 100% UVA and UVB protection and fully conform to British Standard BS EN ISO 12311: 2013 and BS EN ISO 12312-1 (2013).
Traditionally, the material supplied into the building products, windows, ancillary and general PVC moulding markets has met the requirements of BS EN 1401 drain products, BS EN 1329 soil and waste products and BS EN 607 rainwater products.