BERT

(redirected from Bit Error Rate Tester)
AcronymDefinition
BERTBit Error Rate Test
BERTBit Error Rate Testing
BERTBidirectional Encoder Representations from Transformers (language representation model)
BERTBit Error Rate Tester (telecommunication)
BERTBackground Equivalent Radiation Time
BERTBerkeley Reliability Tools
BERTBenicia Emergency Response Team (California)
BERTBranch Effect Reduction Technique
BERTBenefits Election Resource Tool
BERTBusiness and Economic Response Team (Florida)
BERTBroward Emergency Response Team
References in periodicals archive ?
Anritsu Company demonstrated leading-edge PCI Express (PCIe) 5.0 technology using the Anritsu Signal Quality Analyzer-R MP1900A high-performance Bit Error Rate Tester (BERT) and Synopsys DesignWare IP for PCI Express 5.0 during the PCI-SIG Developers Conference 2019, held June 18-19 in Santa Clara, CA.
The Tektronix BSX Series BERTScope bit error rate tester features customizable pattern sequencers and capture-and-decode triggering to gain insight into a problem's root cause."
Retimer functionality supports both receive and transmit functions for full duplex 4x25-28 operation Support for 100G IEEE and OIF standards Strong self-adaptive equalizer with multi-tap DFE and programmable transmit equalization target extended reach up to OIF CEI LR reach for line card, module, copper cable and backplane applications Reverse polarity control for inputs and outputs Self test capabilities, such as on-chip PRBS generator, bit error rate tester, eye opening and eye monitoring Built using low-power standard CMOS technology
This bit error rate tester (BERT) is designed for manufacturing testing of 10 Gbps SONET OC-192 SDH STM64 components.
The D3371-2V-3V Bit Error Rate Tester (BERT) answers the need for a fast, simple tool with which designers can accurately test the performance of communication components and systems and analyze the acquired results.
A BIT ERROR RATE TESTER (BERT) solution for OC-48c optical SONET/SDH interfaces provides Layer 1 performance analysis of SONET and optical networks.
Currently available are: Serialtest Async and Serialtest Spy for Windows 95/98/NT (async serial data and protocol analyzers), Serialtest ComProbe(R) for Win 95/98/NT (a sync and async serial data and protocol analyzer), and SerialBERT(R) for Windows 95/98/NT (Bit Error Rate Tester.) We plan to release Ethertest(R) (Ethernet LAN analyzer) in the second quarter, 2000.
The MP1900A series is a high-performance Bit Error Rate Tester (BERT) that accurately measures communications equipment, next-generation high-speed electronic and optical devices, including those for M2M and IoT applications, and optical transceivers used in high-end servers.
BIT ERROR RATE TESTER merges asynchronous, synchronous, T1, and E1 performance measurements.
Essentially, the MT8801B is eight instruments in one: a cellular/PCS base station simulator, 3 GHz RF spectrum analyzer, digital modulation analyzer covering 300 kHz to 3 GHz, audio analyzer/generator, analog modulation analyzer, digital modulation analyzer with [less than or equal to] two percent error, power meter with built-in thermocouple sensor and bit error rate tester. The analyzer's typical output screen displaying an 835 MHz modulated signal is shown in Figure 1.
Contract notice: AOO-170322-SVI - Bit error rate tester equipment.
Probe and test set features include a bit error rate tester (BERT).