References in periodicals archive ?
DVB and EGDMA cross linkers were procured from Sigma Aldrich and Merck, respectively.
After surface modification with 3(Trimethoxysilyl)propyl methacrylate, selective MIP shell towards [beta]-estradiol was synthesized on the surface of the Si[O.sub.2] nanoparticles using the functional monomer MAA and cross-linker EGDMA. The highest binding of [beta]-estradiol was obtained within a very short time (15 min) with a maximum binding capacity of 44.5 [micro]mol[g.sup.-1].
Hg(II)-imprinted polystyrene was synthesized by using styrene as monomer, EGDMA as crosslinker, and AIBN as initiator while using Hg[I.sub.2] as template.
Afterwards, 531 [micro]L (2.8 mmol) of EGDMA, a cross-linking agent, and 32 [micro]L (0.37 mmol) of MAA were added and shaken in a Vortex during another 15 minutes.
For GN91 copolymer, a mixture of 90%v/v of GMA monomer, 10%v/v of nBA monomer, 0.09 g DMPP, 400 [micro]L EGDMA, 0.1 g SDS, and 10 mL deionized water was prepared in a sample bottle.
[Fe.sub.3][O.sub.4]@MAA particles (100 mg) and TBT (1mmol) were dissolved into 40 mL acetonitrile, stirred at room temperature for 6 h, and supplemented with EGDMA (22 mmol) and AIBN (15 mg).
The results of the skin patch testing to glutaraldehyde and ethyleneglycol dimethacrylate are presented (EGDMA) in the Table 5.
Solution (2) was prepared by adding AIBN (0.19 gr) and EGDMA (3.96 ml) which were dissolved in 2 ml porogenic solvent (toluene: P1).
Poly(dimethyldiphenylsiloxane) divinyl terminated (9300 g/mol ([M.sub.n]); 84:16 mole ratio of dimethylsiloxane/diphenylsiloxane) (PDMDPS), 1,3-dimethyltetravinyldisiloxane (DMTVDS), acrylic acid (AA), ethylene glycol dimethacrylate (EGDMA), Nvinylpyrrolidone (NVP), 1,1'-azobis(cyclohexanecarbonitrile) (ACBN), phenol, toluene, and acetonitrile were all obtained from Aldrich, Canada.
The amounts of ethylene glycol dimethacrylate (EGDMA) in poly(methyl methacrylate) (PMMA) can range from 30-40% by weight in contact lens acrylic polymer down to the tenths of a weight percent in plastics used in automotive or bathtub/hot tub plastics.
Hexyl acrylate (HA, 98%, Sigma-Aldrich, Mexico), 2hydroxyethyl methacrylate (HEMA, 97%, Sigma-Aldrich, Mexico), ethylene glycol dimethacrylate (EGDMA, 98%, Sigma-Aldrich, Mexico), and PEGMA ([M.sub.n] = 526, 1,100, and 4,000 g/mol) from Sigma-Aldrich, Mexico; were purified by passing through a hydroquinone inhibitor remover column.
After that, the selective magnetic molecularly imprinted polymer sorbent for NP (Fe3O4@SiO2-MIP) was synthesized by surface molecular imprinting technique, using NP as template, 4-vinyl pyridine (4-Vpy) as functional monomers, ethylene glycol dimethacrylate (EGDMA) as crosslinker and azobisisobutyronitrile (AIBN) as initiator.
Acronyms browser ?
Full browser ?
- Ege Bölgesi Sanayi Odasi
- Ege denizi
- Ege denizi
- Ege Giyim Sanayicileri Dernegi
- Ege Ihracatçi Birlikleri
- Ege Seramik Dýþ Ticaret AS
- Ege University
- Egean sea
- Egean sea
- Egede, Hans
- Egede-Nissen, Adam Hjalmar