H2SO4


Also found in: Dictionary, Thesaurus, Medical, Encyclopedia.
AcronymDefinition
H2SO4Sulfuric Acid (chemistry)
H2SO4Sulfuric Acid (band)
H2SO42-Hydrogen Sulphate
References in periodicals archive ?
The electrolyte is a conductive solution and the corrosion process then becomes chemical or electrochemical due to a current flow and acquires at least 2 reactions that must occur in a particular corrosive environment and these reactions are classifies as anodic and cathodic reactions and are defined below for a metal M immersed in sulphuric acid, H2SO4, solution.
The H2SO4 mediated bromination appeared to be of greater industrial utility due to the easy availability and economy of reaction involving Br2 and H2SO4.
Eight grams of EAF dust sample containing 3.268 g of zinc were leached for total reacting of this zinc amount, 3.88 mL of concentrated H2SO4 are theoretically necessary.
Micrografias del material lignocelulosico tratado con H2SO4
Desorption of As(V) ions from the banana peel surface was studied using 5 mL of different concentrations of HNO3, H2SO4, HCl and NaOH.
2 showed the spectra derived from palm oil sludge after in situ transesterification with reaction conditions at 70[degrees]C, 12v/v% H2SO4 and 120 minutes.
For sources that are having trouble with obtaining low emissions of H2SO4, and particularly those that have been using ammonia-injection control technology, the use of this method can result in a significant reduction in reported emissions from the source, by removing these varying interferences.
Table 3 represents the attack of H2O and H2SO4 at 90oC for four hours.
Cu Total, g/l H2SO4, g/l Nominal Experimental Nominal Experimental 30 25,77 0 0,242 30 30,81 50 48,20 30 31,38 100 93,0 30 31,28 200 195,2 40 40,26 0 0,04 40 40,6 50 45,00 40 45,7 100 93,20 40 41,3 200 182,00 50 51,04 0 0,219 50 49,15 50 46,6 50 54,82 100 92,1 50 59,36 200 186,4
The presence of 0.05-M H2SO4 in the mobile phase helped decrease the retention time of HATU and 5-bromo-3-cyanopyridine by 4 min.
Sulfuric acid (H2SO4) is a strong acid because it readily dissociates into its component ions.
The test is performed in a normal H2SO4 environment (pH near 0.5) to mimic a very septic sanitary sewer.