ICPAES

AcronymDefinition
ICPAESInductively Coupled Plasma Atomic Emission Spectroscopy
ICPAESInductively Coupled Plasma Atomic Emission Spectrophotometry (usually abbreviated as ICP-AES)
ICPAESInductively Coupled Plasma Argon-Emission Spectrometry
References in periodicals archive ?
Nomenclature TAN: Total acid number TBN: Total base number ICPAES: Inductively coupled plasma emission spectrometer FBT: Four-ball tribotester WSD: Wear scar diameter EP: Extreme pressure SEM: Scanning electron microscope VI: Viscosity index [[mu].sub.0]: Dynamic viscosity [T.sub.A]: Absolute temperature n: Power law index [mu]: Coefficient of friction [rho]: Density at 15[degrees]C [v.sub.40]: Kinematic viscosity at 40[degrees]C [v.sub.100]: Kinematic viscosity at 100[degrees]C Multiple R: Coefficient of multiple correlations [R.sup.2]: Coefficient of determination SS: Sum of squares df: Degree of freedom MS: Mean squared Residual MS: Mean squared error SS Residual: Residual sum of squares SS Total: Total sum of squares.
The significantly higher iron content measured by ICPAES in muJ591:MIC6-injected animals suggests that the iron-containing MIC6 nanoparticle was present in the tumours 3 days after injection but that the levels were below the MRI detectable threshold.
Coelomic fluid was diluted with distilled water and then subjected to ICPAES. Gonads were decomposed by the wet ashing method using concentrated nitric acid, dissolved in 0.1 N nitric acid, and then subjected to ICP--AES.
Determination of trace elements in coal and coal fly ash by joint-use of ICPAES and atomic absorption spectrometry // Talanta.
Specifically, exchangeable cations were determined by shaking 4 g (<2 mm) soil in 80 mL of 1 M N[H.sub.4]Cl (adjusted to pH 7 but unbuffered) for 1h, centrifuging (20 min at RCF 2000G), and determining cation concentration in the solution by ICPAES. Additional measures of soil K pools were undertaken by determining tetraphenyl borate extractable K following the procedure of Carey et al.
Normal and AD-CSF samples were analyzed for Al, S, Na, Mg, Fe, Co, Cu, Mn, Cr, K, Ca, Zn and P using Inductively Coupled Plasma Atomic Emission Spectrometry (ICPAES).
Aluminum and zirconium contents of the supported catalysts were determined by ICPAES on a Varian Vista spectrophotometer.
Inductively Coupled Plasma Atomic Excitation Spectroscopy (ICPAES, Model Perkin Elmer Optima 3000 DV) was used to determine the concentration of selected dissolved ions of water samples and total metal concentrations were determined using the Nitric Acid Digestion method detailed in APHA (2005).
Burton using an Applied Research Labs Model 3520 inductively coupled plasma-atomic emission spectrometer (ICPAES).
Inductive coupled plasma-atomic emission spectroscopy (ICPAES) was done to observe the change in elemental concentration in the SBF.