References in periodicals archive ?
Using (23) and (24), the equivalent parameters of the ILPM can be calculated as
Table 3 lists the resonance frequency and the anti-resonance frequency calculated by the LPM, the ULPM, the CDPM, and the ILPM proposed in this paper.
Figures 12 and 13 show the results of comparison of the tip velocity, the output voltage, and the output power obtained from the ULPM, the LPM, the ILPM, and the CDPM under various excitation frequencies when [R.sub.L] = 1 k[OMEGA] (Figure 12) and [R.sub.L] = 470 k[OMEGA] (Figure 13).
As can be seen from the results in these figures, the tip velocity, the output voltage, and the output power of the ILPM are in perfect agreement with the results obtained from the LPM and the CDPM.
Variations in the resonance frequency with changing load resistance, and the amplitude-wise results, are successfully predicted by the ILPM.
We have proposed an ILPM of the PVEH that takes into account dynamic mode and accurate strain distribution.
Acronyms browser ?
Full browser ?
- Ilovaiskii, Dmitriiivanovich