LVLS

AcronymDefinition
LVLSLehigh Valley Lutheran School (Whitehall, PA)
Copyright 1988-2018 AcronymFinder.com, All rights reserved.
References in periodicals archive ?
Multiple and no LVLs were discovered in 24 (18.2%) and 108 (81.8%) patients, respectively.
Both the SESCCs were also evaluated as LVLs; their boundaries were more visible during the chromoendoscopy.
Selected mechanical properties of laminated veneer lumber (LVL) prepared from Turkish beech (Fagus orientalis L.), Scotch pine (Pinus sylvestris L.), and Lombardy poplar (Populus nigra) veneers bonded with polyvinyl acetate and ureaformaldehyde adhesives and solid wood specimens of the same species were tested to evaluate the effects of species, adhesive type, and veneer grain orientation.
-- Surface roughness of the LVLs made from untreated veneers was not generally influenced by increasing drying temperatures.
MOR and MOE values of Pterocarya fraxinifolia LVLs are higher than those of Populus euramericana, Populus tremula, Populus nigra, and similar to those of Alnus glutinosa.
The three laminated veneer lumber beams (LVLs) that make up our ridge beam are heavy, but not too heavy for two workers to lift safely if handled one-by-one.
In Table 4, the results found for the eucalyptus-based LVLs are placed next to some average values calculated from work published in the literature, for which the ASTM D 198 procedures (1) were used to evaluate LVL panels.
Engineers typically look in three directions for strong, compact beams--to "glu-lams," "LVLs" or steel (Fig.
Of the SCL materials tested, only veneer-based LVLs were observed to have toughness values consistently greater than those published for corresponding solid wood material.
Test of fire-retardant-treated (FRT) laminated veneer lumber (LVL) indicated moisture gain under adsorption and moisture loss under desorption conditions.
This study was designed to determine some physical and mechanical properties of laminated veneer lumber (LVL) made of black alder (Alnus glutinosa).
In most cases, laminated veneer lumber (LVL) is the best material for the beam; it's stronger than solid wood, but you can cut and nail it like wood.