PCBNPolycrystalline Cubic Boron Nitride
PCBNPacific Coast Business Networking (California)
PCBNPeoples' Comic Book Newsletter (fanzine)
PCBNProgressive Christian Bloggers Network
Copyright 1988-2018 AcronymFinder.com, All rights reserved.
References in periodicals archive ?
KBH10 is an uncoated PcBN turning insert that offers exceptional wear resistance and very low cutting forces.
Optimization of hard turning process parameters with PCBN tool based on the Taguchi method, Technical Gazette, Vol.
We can use cutting fluid, when apply mixed hard turning cutting ceramics ([Al.sub.2][O.sub.3] + TiC) coated with waste, or the PCBN, as equivalent cutting materials for hard machining, and cooling may be also used.
Condensed down to laymen's language, what happens is that a specially designed tool made of Polycrystalline Cubic Boron Nitride (PCBN), spinning at a high rate of speed, is brought under heavy pressure in contact with what will become the cutting edge of the billet of D2 steel.
The SPECTRA 820 creates chip breakers in PCD, PCBN, carbide and ceramic tools by passing the workpiece under a highly focused laser beam that is programmed to operate at up to 100,000 pulses per second.
The Spectra 820 provides a quality solution to the challenge of creating chip breakers in PCD, PCBN, carbide, and ceramic tools.
The SumiBoron line of PCBN inserts can be used for high-speed interrupted and continuous cutting applications.
[11] focused on the continuous hard turning of AISI 52100 steel using coated and uncoated [Al.sub.2][O.sub.3]-TiCN ceramic tools cheaper than CBN or PCBN. Authors noticed from the results that the damage types of fracture and chipping arise more commonly in uncoated tools while the most common type of damage is crater wear in TiN coated tools.
Yen, "Optimisation of the finish hard turning process for hardened 52100 steel with PCBN tools," International Journal of Manufacturing Research, vol.
Seco will also display the Highfeed 6 milling cutter, Niagra Stabilzer 2.0 end mill, PCBN insert series, and TK1501 and TK0501 grades.
This sticking effect is caused probably by the presence of aluminum in matrix of PCBN. The amount of the workpiece material stuck to the tool will keep increasing with the total time of machining.