PEDOT


Also found in: Wikipedia.
AcronymDefinition
PEDOTPolyethylenedioxythiophene
References in periodicals archive ?
In terms of charge storage, the intermediate layer of 31-PEDOT/COP was viewed as a thin reservoir filled with heterogeneously distributed nanometric supercapacitors that are connected in series among them and in parallel to the PEDOT layers [12].
At elevated temperature, the thermal stability of PEDOT is a major argument to substitute the much more stable MnO2 in tantalum electrolytic capacitors.
In 2012, another group reported that graphene is more effective in improving the TE properties of PEDOT:PSS compared to CNT [207].
PEDOT is stored between 4[degrees]C and 25[degrees]C in a vacuum freezer.
High Brightness Fluorescent White Polymer Light-Emitting Diodes by Promoted Hole Injection via Reduced Barrier by Interfacial Dipole Imparted from Chlorinated Indium Tin Oxide to the Hole Injection Layer PEDOT:PSS.
Servati, "Reducing the roughness of transparent electrodes in organic photovoltaic devices on plastic substrate by PEDOT:PSS treatment," 2009 IEEE Nanotechnology Materials and Devices Conference, 2009, pp.
Biocompatible polymeric materials like poly(3,4-ethylenedioxythiophene), PEDOT, is a stable conductive polymer and widely used for biomedical implant applications [11] due to their similar structural feature like melanin.
In a similar direction, the employment of conductive nanomaterials (e.g., silver nanowires (AgNWs) [18], poly (3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) [19], and CNTs [20]) can improve the performance of the TCs because of very low heat capacity accompanied by Seebeck coefficients of circa 40 [micro]V/[degrees] C [21, 22].
The matrix sensor array was printed using only five functional inks: fluoropolymer P(VDF-TrFE) (poly(vinylidene fluoride trifluoroethylene)), the conductive polymer PEDOT:PSS (poly(3,4-ethylenedioxythiophene): poly(styrene sulfonic acid)), a conductive carbon paste, a polymeric electrolyte, and a photoresist separation layer.
Process-dependent conductivity and film homogeneity of slot-die-coated PEDOT: PSS-PVA composite films--A.-L.
However, this electrode begins with a thin gold base attached to zinc oxide nanowires coated in a thin gold layer and a conducting polymer called PEDOT [poly (3,4-ethylenedioxythiophene)].
This project optimizes graphene oxide to meet the level of a current standard material, Poly3,4-ethylenedioxythiophene-polystyrenesulfonate (PEDOT:PSS), as a hole transport layer (HTL), which is a key layer for charge separation within a photovoltaic cell.