Also found in: Dictionary, Encyclopedia, Wikipedia.
Related to PREAMP: phono preamp
PREAMPPre-competitive Advanced Manufacturing Process
Copyright 1988-2018, All rights reserved.
References in periodicals archive ?
All these analog stages should inaudible, but fewer stages would be encountered in a stereo preamp.
The Marchand slightly softened hard edges on loud brass, cymbals, bells and similar sounds, and the Parasound preamp presented a slight bit more spaciousness on some stereo recordings compared to the Marchand.
The PH-1 phono preamp is a relatively new addition to their list of products.
The approach is complex, but it allows the analog section to have distortion and dynamic range performance rivaling high-end stereo preamps, which are often made from the same SSI ICs.
Merrill Audio Pure Tape Head Preamp is the 1st of series of 3 Tape head Preamps.
Given that it's a 13.3-channel preamp with advanced Dolby Atmos and DTS:X support, there are certainly oodles of those to be seen.
As one channel of preamp calibration needs five DFFs, as mentioned above, there are 16 channels which need to be calibrated, so altogether there are 80 DFFs used in here.
A receiver basically is a 3 in 1 component combo -- a preamplifier (or preamp), a tuner, and an amplifier.
Its built-in switchable phono preamp enables it to be used with a wide variety of music and home entertainment systems, powered speakers, and A/V receivers that do not include a dedicated phono input.
A REAM of paper could be used, To get the PREAMP din de-fused.
Built into the guitar is a Fishman Isys III System preamp, as well as an onboard tuner.