Also found in: Encyclopedia.
PSRRPower Supply Rejection Ratio
PSRRPower Supply Ripple Rejection
PSRRPower Supply Ripple Rejection (circuit measurement)
PSRRPort Service Request Register (computing)
PSRRProduct and Support Requirements Request (Sprint)
PSRRPreliminary System Requirements Review
PSRRPrimary Shadow RTO.k Replication
Copyright 1988-2018, All rights reserved.
References in periodicals archive ?
In this paper, we start from the construction and the homogenization of bianisotropic MMs by means of planar split-ring resonators (PSRRs).
Chairing a meeting to review the PSRR here, the chief minister expressed satisfaction over the pace of implementation on the programme.
The integrated LDOs feature high 65-dB PSRR (power-supply rejection ratio) performance that ranges from 1 kHz to 10 kHz, lowering output noise to 80 ?V/rms for powering sensitive analog circuitry.
These products offer the highest performance available on the market today, with jitter in the sub-100 femtosecond range and excellent Power Supply Rejection Ratio (PSRR)," noted Rami Kanama, director, high bandwidth products, Micrel.
With the LDO, the power supply rejection ratio (PSRR) on the audio outputs is improved to more than 100 dB.
This object-based, real-time fault tolerance scheme is called the primary-shadow RTO.k replication (PSRR) scheme and has been validated through several real-time computing application development experiments conducted in the authors' laboratory.
32, Peter Delos brings us "Demystifying Power Supply Modulation Ratio: How Does PSMR Differ from PSRR?," which focuses on quantifying the impact of power supply noise voltage levels on phase noise.
The designed folded op amp has a gain of 105 dB, phase margin of 80[degrees], CMRR of 110 dB, slew rate of 2.0 V/[micro]s, input common-mode range (ICMR) of 2.0 V, gain bandwidth of 1k[OMEGA], averaged power supply rejection ratio (PSRR) of 118 dB, output swing of 1.8 V, input-referred noise of 10.8 nV/[square root of (Hz)] at 1 MHz, power consumption of 0.88 mW at a power supply of 1.8 V, and load capacitance of 10 pF in the TT design corner.