Also found in: Dictionary, Thesaurus, Medical, Encyclopedia, Wikipedia.
PTFEPolytetrafluoroethylene (Teflon)
PTFEPolymer, Textile and Fiber Engineering
PTFEPlumbers Tape for Everything
PTFEPresidential Task Force for Education (US Office of the Presidential Assistant for Education)
PTFEPrecise Time and Frequency Equipment
Copyright 1988-2018, All rights reserved.
References in periodicals archive ?
As can be seen, the distribution of Al particles of 50 nm in the PTFE matrix was best uniform in all of specimens; this uneven distribution resulted in specimen #4 tending to form the stress concentration; thus, specimen #4 was more prone to local deformation and even failure compared with specimens #1 and #2.
The carbon/glass fiber and PTFE were kept in an oven at 105[degrees]C for 3 h before the mixing process.
The process developed by 3M Advanced Materials, which is based on stereolithography, enables the printing of fully fluorinated polymers such as PTFE with the aid of a binding agent and, if necessary, with additives such as fillers used in conventional manufacture to initially form a so-called hydro-gel.
La aplicacion por la enfermeria de un programa de monitorizacion del AV es eficaz en la prevencion de trombosis, alargando la vida util de FAVs y PTFE. El descenso del flujo intracceso es el parametro mas sensible, y si bien presenta algunos casos de falsos positivos, estos quedan compensados por la eficacia del programa.
Global market for Polytetrafluoroethylene (PTFE) has reached 165 thousand metric tons in 2015 and is projected to reach 247 thousand metric tons by 2022 at a CAGR of 5.6% between 2016 and 2022.
NR/NBR, NR/CR and NR/CR/NBR blends with and without PTFE micro powders were first mixed on a two-roll mill according to the rubber blend compositions.
Because the analyst was considering the char weight loss to represent the PTFE, he felt that this difference of less than 1% from the other part tested was insignificant.
This lower temperature binder was used to hold the PTFE in a matrix to preserve the characteristics of the Nitinol material.
Recently, the company also announced the availability of PTFE in six standard colors, as well as customized colors for use on medical products.
PTFE micro powder or micronized PTFE is made from virgin polytetrafluoroethylene resin or recycled PTFE scrap.
The PTFE tubing has been approved for use in heat exchanger systems in which recovered heat is used to partially preheat boiler feed water.
AdvantaPure has introduced its stainless steel overbraided PTFE hose in four styles.