R/W

(redirected from Random Width)
AcronymDefinition
R/WRight-Of-Way
R/WRead/Write
R/WReinforced With
R/WRotary Wing (aviation)
R/WRandom Width
R/WReimbursable Work
R/WRaw Weight
References in periodicals archive ?
What might not be as common is replacing the ordering of random width hardwood lumber with specific hardwood lumber rips designed specifically for your company's needs.
Next, using a simulated a 12-inch gang ripsaw with one moving blade, an added random width panel part was added to the cut bill.
To address this void, two charges, as required by the Federal Register (2006), of random width, 100 to 300 mm (4 to 12 in) wide, 32-mm (5/4-in) nominal thickness, approximately 2.
Also, the rip width combinations on the arbor may not provide good yield from random width lumber, but presorting the lumber by width prior to ripping to best utilize the different arbor set-ups will help in attaining better yields.
A large volume of random width and random length hardwood factory lumber produced in Quebec is used in furniture, cabinetry, and flooring industries.
3]) contained in 1,613 boards of digitized random width and random length white birch.
The lumber processed in most rough mills typically arrives from vendors in packages of random width boards with lengths ranging from 8 to 16 feet.
They include random width lumber, furniture, interior trim and mouldings, and kitchen cabinets.
The system unites eight separate processing steps into one continuous flow, converting random width and length lumber into ready-to-use moulding blanks and other products with efficiency.
The flakes measured approximately 3 inches long, random width, and thickness of either 0.
Clonal variation in the quality of radiata pine random width boards.