SP4T

AcronymDefinition
SP4TSingle-Pole Four-Throw (switch)
References in periodicals archive ?
The proposed SP4T MEMS switch is comprised of a coplanar waveguide and eight MEMS switches on a silicon substrate [10] as shown in Figure 1.
The SP4T switch configuration is series-shunt PIN diode integrated on alumina.
The RX has four SFPAs, a SP4T switch, a low noise amplifier (LNA), a mixer, a low pass filter (LPF), an intermediate frequency (IF) amplifier, and an analog-to-digital converter (ADC).
Available configurations include dual, quad, and octal SP4T; single, dual, and quad SP8T; single and dual SP16T; and single SP32T.
By controlling four pin diodes of a single-pole-four-throw (SP4T) switch, switched-beam radiation patterns for WLAN applications are obtained in one plane.
introduced a family of coaxial solid-state PIN diode switches that include the P9400A/C transfer, P9402A/C SPDT and P9404A/C SP4T switches with a broad operating frequency range from 100 MHz up to 18 GHz for automatic test equipment (ATE) systems.
A SP4T GSM switch with built-in decoder and electrostatic discharge protection is demonstrated at a control voltage of 2.7 V.
The switch circuitry consists of a low cost non-reflective SP4T switch in a 16-lead QSOP package.
The expanded range of PXI 50-[OMEGA] 600-MHz RF multiplexers (Series 40-760) is available in the following configurations: dual, quad, and octal SP4T; single, dual, and quad SP8T; single and dual SP16T; and single SP32T.