TDCBTapered Double Cantilever Beam
References in periodicals archive ?
The TDCB test has proved to be accurate and reproducible.
The force required to pull an EPDM coated 500g weight over a TDCB plate, coated with a release coating, was determined.
Peel adhesion - Using the release epoxy plaques from the TDCB test, a 180 [degrees] peel test was performed on both epoxy surfaces using a standard pressure sensitive adhesive tape (ASTM D3330 M-83) (ref.
Paint adhesion - Again using released epoxy plaques from the TDCB test, a standard primer paint was applied to one surface and allowed to dry.