TXV

AcronymDefinition
TXVThermostatic Expansion Valve
Copyright 1988-2018 AcronymFinder.com, All rights reserved.
References in periodicals archive ?
For a system using a TXV as the expansion device, the dependence of [T.sub.sh] and [T.sub.sc] on refrigerant charge levels, condenser inlet air temperatures, and outdoor airflow rates would be different than if the system employed a FXO device as the expansion device.
According to ANSI/ASHRAE Standard 17, Method of Testing Capacity of Thermostatic Refrigerant Expansion Valves (ASHRAE 1998a) and ARI Standard 750, Thermostatic Refrigerant Expansion Valves (ARI 2001), throat area A is nearly fixed by fixing the opening superheat when generating the manufacturers' rating data for a TXV. For an EXV, the throat area A is exactly fixed at the rating value.
The inside of the valve was entirely coated with a film of CNT (Figure 5), as were the very small 3/32 inches (2.4 mm) inside diameter tubes (downstream of the TXV) leading into the evaporator.
TXV 200 15 Tubing 100 10 PCB and controller 100 30 Desiccant Wheel 400 100 RHX paneling 300 50 Miscellaneous items 100 50 Total 2,000 500
For example, condenser temperature would decrease significantly for fixed orifice systems, but it would be unchanged for a TXV system until the fouling became severe.
The tested split-system air conditioning equipment is a nominal 3-ton (36,000 Btu/hr) unit with a Seasonal Energy Efficiency Rating (SEER) of 13 and an Energy Efficiency Rating (EER) of 11.2 when equipped with a hard shut-off (HS) TXV, time delay relay (TDR), and R-22 refrigerant.
At each condition, the evaporator exit superheat was controlled by adjusting the TXV to 3-4K (6-7F).
She said they boarded a white taxi with license plate TXV 149.
- In February 2017, TxV Aero Composites, a joint-venture between Victrex Plc.
The VICTREX AE 250 composites and the TxV joint venture for aerospace, the new extended food grade portfolio VICTREX FG, medical trauma plates and dental prosthetics in the medical field, with new PAEK products for Additive Manufacturing (AM) in development, mark the milestones to come in the Victrex PAEK/PEEK journey of the next 40 years.
Last year, Victrex announced it was investing in a joint venture, TxV Aero Composites, with long-standing development partner TriMack Manufacturing, to build the necessary supply chain.