(redirected from Tetraethylorthosilicate)
TEOSTrusted E-Mail Open Standard
TEOSTrusted Email Open Standard (email spam prevention solution)
TEOSPlanets: The Exploration of Space (online game)
TEOSTerrestrial Ecology Observing Systems (University of California, Los Angeles)
TEOSTraffic Engineering and Operations Section (Oregon Department of Transportation)
TEOSTetra Ethyl Oxysilane
Copyright 1988-2018 AcronymFinder.com, All rights reserved.
References in periodicals archive ?
[38] found that hydrophilicity increases as TEOS ratios increase when used a silica sol with tetraethylorthosilicate (TEOS) and 3-methacryloxypropyltrimethoxysilane (TMSM) at different molar ratios.
Tetraethylorthosilicate (TEOS), triethoxyvinylsilane (VTOS), dibutyltin dilaurate (DBTDL), [alpha]-hexane, and ethanol were obtained as analytical reagents from Shanghai Chemical Reagent Company, China.
Tetraethylorthosilicate (TEOS) layers were applied on the glass substrate before coating with Ti[O.sub.2]-P25.
The pH of the synthesis gel strongly affects the hydrolysis-condensation rate of tetraethylorthosilicate (TEOS) and therefore will affect the material geometry modifying the pore architecture, wall thickness and particle size, and the terminal groups located at the walls surface.
23 and 24).Termination of anionic styrene-butadiene copolymerization with tetraethylorthosilicate (TEOS) yields an alkoxysilane functionalized polymer that has been shown to interact with silica in rubber stocks on a laboratory scale (ref.
[12] Arun Kumar, Ravi Ranjan Pandey and Brian Brantley, 2006, "Tetraethylorthosilicate film modified with protein to fabricate cholesterol biosensor," Talanta, 69(3)pp 700-705.
In another article, (11) a new class of nano Si[O.sub.2]/acrylic resin composite latex was synthesized by introducing nano Si[O.sub.2] particles formed in-situ hydrolysis of tetraethylorthosilicate in emulsion polymerization.
The synthesized dimethyldiphenylsiloxane copolymers having different contents in diphenylsiloxane units (between 6.7-21.6 % moles) were mixed in different ratios with tetraethylorthosilicate as crosslinker in presence of dibutyltindilaurate as catalyst.
The process uses 25 kg of liquid silicone (hexamethyldisilazane and tetraethylorthosilicate) per metric ton of clean flake, or 2.5%.
In the present investigation porous silica gels with high surface areas were prepared from tetraethylorthosilicate (TEOS) and Polyacrylic acid (PAA) of high molecular weight in acid media by a sol-gel method.
Gauze traps are used in this way when capturing tetraethylorthosilicate (TEOS).