(redirected from Thermal spraying)
Also found in: Encyclopedia, Wikipedia.
THSPTexas High School Project
THSPThermal Spraying (welding)
Copyright 1988-2018, All rights reserved.
References in periodicals archive ?
Thermal spraying machines and micro-spray could also be used, she added.
Thermal spraying has been considered successful to apply the protective coatings, without disturbing any other properties of the component (Bala et al., 2009; Tillmann et al., 2000).
In general, particle velocity prior to the impact is an important factor for cold spray because the successful deposition of cold-sprayed particles relies only on the kinetic energy rather than the combined effect of both kinetic and thermal energies available in conventional thermal spraying. It has been widely accepted that there exists a unique critical velocity for a given condition (e.g., specific particle size, temperature, and material properties), above which successful bonding can be achieved [8-10].
Two prototype Ford 5.2l V8 blocks were instrumented with thermocouples to measure temperatures during thermal spraying. In the first block (Fig.
This tribological advantage is beneficial for using titanium alloy in hip joint implants [3].The surface properties have to be improved for sake of reliability and convenience and is generally coated by thermal spraying. It is the process in which the range of coating thickness is very large [4].
One such method is thermal spraying, a generic term used to define a group of processes that deposit fine metallic or non-metallic materials onto a prepared substrate to form a coating.
The AWS was founded in 1919, and is a nonprofit organization with a global mission to advance the science, technology and application of welding and allied joining and cutting processes, including brazing, soldering and thermal spraying. The organization serves more than 70,000 members.
The effect of roughness and pre-heating of the substrate on the morphology of aluminium coatings deposited by thermal spraying. Surface & Coatings Technology 200, 3049-3055.
[USPRwire, Thu Jan 15 2015] Thermal spraying is a process of coating melted metallic or non-metallic materials on the surface.