TiCNTitanium Carbonitride
TiCNThe Investment Club Network
TiCNTopics in Clinical Nutrition (quarterly journal; Lippincott Williams and Wilkins)
References in periodicals archive ?
Fatigue properties of a SAE 4340 steel coated with TiCN by PAPVD, International Journal of Fatigue, 29: 471-480.
Debido a propiedades excelentes como punto de fusion alto, dureza alta, conductividad termiea alta los materiales ceramicos multicomponente, tales como ZrCN, TiCN and TiNbCN se han usado como reeubrimientos protectores (40,41).
Amongst the coatings deposited using these sources are diamond, DLC, TiN, TiCN, Ti-DLC, Cr-DLC, siloxane, MoST TM and Graphite-iC TM carbon.
2001) reported that the wear of TiN, CrN, CrC, TiCN, and TiA1N coatings when cutting wood-chip cement board resulted from delamination of the coating film at both low- and high-cutting speeds.
The XTF Forming Tap is a TiCN coated tap for high-speed tapping of stainless and carbon steels.
This 460cc Ti-carbon series features a copper titanium TiCn Hi-LO Face which creates a higher ball flight with less backspin.
For example, TiN, TiZrN, or TiCN are often the underlayer that provides wear resistance when coated on stainless steel.
Stocked in either TiN or TiCN coatings, the roughing end mills are available in 1/4-, 5/16-, 3/8-, 1/2-, 5/8-, 3/4-, and 1-in.
Improved CVD coating adhesion provides enhanced anti-peeling performance through optimal layer composition consisting of an ultra-fine TiCN layer, an alpha-alumina layer and Kyocera's proprietary, special-surface top layer.
Currently, hard coatings for wear reduction of cutting tools, like TiN, TiCN and TiAlN are well established.
Different commercial coatings (TiN, TiCN, Ti/AlN and nACo) on WC-Co substrate with different surface roughness were investigated (Fig.
Steinmann, PA, Hintermann, HE, "Adhesion of TiC and TiCN Coatings on Steel.