AL2O3

(redirected from aluminum oxide)
Also found in: Dictionary, Thesaurus, Medical, Financial, Encyclopedia.
AcronymDefinition
AL2O3Aluminum Oxide
Copyright 1988-2018 AcronymFinder.com, All rights reserved.
References in periodicals archive ?
This media will outlast Aluminum Oxide by 30x, Glass Bead by 50x, and Garnet by 60x.
Carefully pressing the edges down and then reapplying aluminum oxide to the grip frame works very well.
Figures 1-5 show mechanical properties such as tensile strength, tensile modulus, and elongation at break, bending strength, and bending modulus of magnesium oxide (MgO) and aluminum oxide ([Al.sub.2][O.sub.3]) and phosphoric acid ([H.sub.3]P[O.sub.4]) fire retardants treated short jute fibers composites.
Active fluxes strip away the aluminum oxide layer from molten metal promoting coalescence of metallic drops, and help in reducing unwanted chemical impurities.
Three main techniques of anodization such as mild anodization, hard anodization and pulse anodization are adopted for the fabrication of self-organized anodic aluminum oxide nanostructure [8].
The rods feature Fuji K-series stainless-frame guides with rings of Alconite--a Fuji ceramic falling on the hardness and heat-dissipation scales somewhere between traditional aluminum oxide and the premium silicon carbide.
Both aluminum oxide powders resulted in a mixture of several polymorphs, mainly [alpha], [delta], and [gamma]\, but no other phases were observed.
In this study, zinc aluminum oxide nanowires were fabricated using anodic aluminum oxide (AAO) as a template.
Effect of Processing Parameters on Pore Structure and Thickness Of Anodic Aluminum Oxide (AAO) Tubular Membranes.
In October 2010, 185 million gallons of caustic sludge burst from an aluminum oxide plant in Ajka, Hungary, deluging nearly 2,000 acres and spilling into the Danube River.
The coating is comprised of a UV-reflecting coating disposed, directly or indirectly, on the substrate, wherein the UV-reflecting coating is comprised of at least 0.1% by weight aluminum oxide, and at least 0.1% by weight material having a refractive index higher than the aluminum oxide, and wherein the material having the refractive index higher than the aluminum oxide includes at least one: zirconium oxide, yttrium oxide, hafnium oxide, and oxides of rare earth metals; and a photocatalytic layer disposed over the UV-reflecting coating so that at least some of any UV light that is not initially used in the activation of the photocatalytic layer and otherwise would pass into the substrate is reflected back towards the photocatalytic layer by the UV-reflecting coating.