CMFLR

(redirected from cam follower)
Also found in: Dictionary, Encyclopedia, Wikipedia.
AcronymDefinition
CMFLRCam Follower
Copyright 1988-2018 AcronymFinder.com, All rights reserved.
References in periodicals archive ?
In this way it can both meet the rapid opening of the valve and effectively improve force condition of the Cam follower system, eventually improve the service life of the device and operation safety.
The principle of the knee joint cam control parameter [theta] 3 is given in Figure 12, and the knee joint cam follower follows the below relationship:
1) As the mold opens, the air pistons move the bearing plates forward, taking up a small space between the cam and cam follower. This provides an initial clearance between the tapers of the cores and the rotating ratchet rings.
Featured bearing products include: cam follower, ball, roller, spherical, aircraft and needle bearings.
In previous designs, the company used a type of cam follower to act as a roller on which the upper part of the machine could move.
Typical applications: repair or preventive welding of rollers of running gears of tractors, tanks etc, rollers of wire drawing machines, motor car parts (axes, shafts), operating parts of offhighway vehicles, engine parts (camshaft, cam follower, crankshaft for compressor), and hydraulic pump pistons.
plastic portion of the cam follower had melted, causing the misfire.
Mr Harris has designed two very different mechanisms to create exactly the same motion: a compound cam mechanism in which the center of the cam is on a linear slide and the cam follower roller(s) is fixed; and a multiple-cam driver that generates combined linear and rotary movement of a second shaft.