(redirected from weld line)
Also found in: Encyclopedia.
Category filter:
WLWeight Loss
WLWilderness Lodge (Disney Resort)
WLWhole Life (insurance)
WLWorld Lock (gaming)
WLWater Level
WLWeld Line
WLWaiting List
WLWestlife (band)
WLWater Line
WLWeakest Link (TV game show)
WLWorld League (volleyball)
WLWeight Lifting
WLWhose Line (Whose Line is it Anyway? TV show)
WLWave Length
WLWaste Land
WLWarning Lights
WLWarning Letter
WLWorking Level
WLWest Longitude
WLWeak Link (physics)
WLWind Load
WLWright Laboratory
WLWoodcliff Lake (New Jersey)
WLWide Load
WLWordline (computer memory)
WLWage Leader
WLWhole Loan
WLWeapons Laboratory
WLWindow Length
WLWork Leader
WLWeird Look
WLWeight for Length
WLWeak Localization
WLWerkstofflabor (US NASA)
WLWomen's List (Iceland political party)
WLWhiteshell Laboratories (Manitoba, Canada)
WLWidely Linear
WLWoods Lamp (type of ultraviolet lamp)
WLWet Laboratory
WLWakening Lands (Everquest)
WLWestern Laboratories (of BASD)
WLWashington Laboratories, Ltd (Gaithersburg, Maryland)
WLWomen's Liberator (wetsuit)
WLWestliche Länge (German: western longitude)
WLWar Legions
Copyright 1988-2018 AcronymFinder.com, All rights reserved.
References in periodicals archive ?
By changing the injection molding parameters, it is possible to influence the properties of the material in the weld line area [2, 18-20].
The overlapping technology is also said to reduce weld lines to generate a more consistent finished product.
The pole lengths are then summarized regarding their characteristic poles, which includes, for example, poles with centrally located injection point or weld line. For the gating system with two injection points characteristic poles are, for example, the poles numbers 12 and 24 with centrally located injection point or 6 and 18 with centrally located weld line (compare to Figure 3).
Using moulding simulation software, part design and gate positions can be modified to ensure the inevitable weld line is in a less obvious and less stressed position.
2, the weaving path and weld line are relative to world frame W.
This process modification was successful at reducing the weld line movement and delaying tearing failure along the weld line compared to the case where a uniform binder force was applied to the TWB.
Here, solid line of "near Ch.1" designates the AE signals whose sources were close to the channel-1 sensor or the weld line. Broken line indicates AE signals from the rust on the right surface close to the channel-2 sensor.
The friction weld line has to be polished out, in order to retain the laminar flow characteristics, that are so important to the efficiency of the component.
On small parts or on single--gated parts, predicting weld line location is easy for an experienced plastics professional, but an instrument panel retainer is one of the most complex parts produced by injection molding.
The weld line strength was important to the end-use performance of the part.
For the practical experiment research, there is universal evaluate system of weld line, such as length and depth of the V-shape groove for measuring appearance quality [1,2], and tension/impact strength for evaluating mechanical properties [3-5].